Williams Arcades Wiki - Recent changes [en]

User:Deniscjf

Deniscjf — Sun, 13 Sep 2026 13:39:14 GMT

User account Deniscjf was created

User:Waynepag

Waynepag — Sun, 13 Sep 2026 11:00:00 GMT

User account Waynepag was created

User:Shinergyfyo

Shinergyfyo — Sun, 13 Sep 2026 02:59:58 GMT

User account Shinergyfyo was created

User:SylvesterClucas

SylvesterClucas — Sun, 13 Sep 2026 02:50:03 GMT

User account SylvesterClucas was created

4164/41256 RAM Modification

Braedel — Sat, 12 Sep 2026 13:55:56 GMT

Modify the MPU

← Older revision		Revision as of 13:55, 12 September 2026
(5 intermediate revisions by the same user not shown)
Line 27:		Line 27:

	== Modify the MPU ==		== Modify the MPU ==
	What we need to do: For the 4164/41256 to work, we need to accomplish a few things.		What we need to do: For the 4164/41256 to work, we need to accomplish a few things.
	* '''Remove the -5v from Pin 1'''
			* '''Remove the -5v from Pin 1'''
	* '''Remove the +12v from Pin 8'''		* '''Remove the +12v from Pin 8'''
	* '''Substitute +5v on Pins 1 and 8 (If we left these unconnected/floating, the address value would randomly change~~'''~~		* '''Substitute +5v on Pins 1 and 8''' (If we left these unconnected/floating, the address value would randomly change)
	* '''The goal is to have +5 on Pins: 1,8 and 9. Ground stays on Pin 16		* '''The goal is to have +5 on Pins: 1, 8 and 9. Ground stays on Pin 16'''
			* '''This mod does NOT damage the PCB; no cutting traces, etc. Everything can easily be undone/reverted!'''
			* '''No change to wiring harness or power supply needed - board will work in all cabinets'''


	Original MPU Power Connector Pinout		Original MPU Power Connector Pinout

	[[File:MPU_Unmod_Power_-_Noted.png\|center\|800px\|Original MPU Power Connector Pinout]]		[[File:MPU_Unmod_Power_-_Noted.png\|center\|800px\|Original MPU Power Connector Pinout]]

	'''Step 1''' — Cut pins 5(+12 Regulated) and 9(~~-5v~~) * Keep one of the cut off pins *		'''Step 1''' — Cut pins 5 (+12 Regulated) and 9 (−5 V). Keep one of the cut-off pins.
	* Note - The ~~'Polarizing Key~~ is on Pin 4. With the mod, if the connector is reversed/flipped it can't be plugged in *
	* Note - Pin 1 is on the right and Pin 9 is on the left *		* Note — The polarizing key is on Pin 4. With the mod, if the connector is reversed/flipped it can't be plugged in.
			* Note — Pin 1 is on the right and Pin 9 is on the left.

	[[File:Modified_Power_Connector.jpg\|center\|800px\|Pins 5 and 9 cut]]		[[File:Modified_Power_Connector.jpg\|center\|800px\|Pins 5 and 9 cut]]

			'''Step 2''' — Modify the solder side of the MPU
			*In this view, Pin 1 is on the left and Pin 9 on the right.
			* '''Use a cut off pin to bridge pins 5 and 6!'''

			[[File:Board_Mod_-_Solder_Side.jpg\|center\|800px\|Solder-side MPU modification]]

	== See also ==		== See also ==
	* [[Hardware - General]]		* [[Hardware - General]]
	* [[Battery Damage]]		* [[Battery Damage]]

File:Board Mod - Solder Side.jpg

Braedel — Sat, 12 Sep 2026 04:52:17 GMT

Braedel uploaded File:Board Mod - Solder Side.jpg

New page

4164/41256 RAM Modification

Braedel — Sat, 12 Sep 2026 04:50:25 GMT

Modify the MPU

← Older revision		Revision as of 04:50, 12 September 2026
(7 intermediate revisions by the same user not shown)
Line 27:		Line 27:

	== Modify the MPU ==		== Modify the MPU ==
	Original MPU Power Connector Pinout~~(unmodified)~~		What we need to do: For the 4164/41256 to work, we need to accomplish a few things.
			* '''Remove the -5v from Pin 1'''
			* '''Remove the +12v from Pin 8'''
			* '''Substitute +5v on Pins 1 and 8 (If we left these unconnected/floating, the address value would randomly change'''
			* '''The goal is to have +5 on Pins: 1,8 and 9. Ground stays on Pin 16
			Original MPU Power Connector Pinout

	[[File:MPU_Unmod_Power_-_Noted.png\|center\|800px\|Original MPU Power Connector Pinout]]		[[File:MPU_Unmod_Power_-_Noted.png\|center\|800px\|Original MPU Power Connector Pinout]]

			'''Step 1''' — Cut pins 5(+12 Regulated) and 9(-5v) * Keep one of the cut off pins *
			* Note - The 'Polarizing Key is on Pin 4. With the mod, if the connector is reversed/flipped it can't be plugged in *
			* Note - Pin 1 is on the right and Pin 9 is on the left *

			[[File:Modified_Power_Connector.jpg\|center\|800px\|Pins 5 and 9 cut]]

	== See also ==		== See also ==
	* [[Hardware - General]]		* [[Hardware - General]]
	* [[Battery Damage]]		* [[Battery Damage]]

File:Modified Power Connector.jpg

Braedel — Sat, 12 Sep 2026 04:32:02 GMT

Braedel uploaded File:Modified Power Connector.jpg

New page

4164/41256 RAM Modification

Braedel — Sat, 12 Sep 2026 04:30:14 GMT

Modify the MPU

← Older revision		Revision as of 04:30, 12 September 2026
(2 intermediate revisions by the same user not shown)
Line 27:		Line 27:

	== Modify the MPU ==		== Modify the MPU ==
			Original MPU Power Connector Pinout(unmodified)

			[[File:MPU_Unmod_Power_-_Noted.png\|center\|800px\|Original MPU Power Connector Pinout]]

	== See also ==		== See also ==
	* [[Hardware - General]]		* [[Hardware - General]]
	* [[Battery Damage]]		* [[Battery Damage]]

File:MPU Unmod Power - Noted.png

Braedel — Sat, 12 Sep 2026 04:27:07 GMT

Braedel uploaded File:MPU Unmod Power - Noted.png MPU Power Connections

New page

== Summary ==
MPU Power Connections

4164/41256 RAM Modification

Braedel — Sat, 12 Sep 2026 04:24:58 GMT

← Older revision		Revision as of 04:24, 12 September 2026
Line 25:		Line 25:

	[[File:Ram_Comparison.png\|center\|800px\|4116 vs 4164 vs 41256 pinout]]		[[File:Ram_Comparison.png\|center\|800px\|4116 vs 4164 vs 41256 pinout]]

			== Modify the MPU ==

	== See also ==		== See also ==
	* [[Hardware - General]]		* [[Hardware - General]]
	* [[Battery Damage]]		* [[Battery Damage]]

MediaWiki:Citizen.css

Braedel — Sat, 12 Sep 2026 04:19:45 GMT

Blanked the page

← Older revision		Revision as of 04:19, 12 September 2026
(2 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	~~/* Hide right page sidebar (TOC / last modified) */~~
	~~.citizen-page-sidebar,~~
	~~.citizen-toc,~~
	~~#citizen-toc,~~
	~~.citizen-page-header-actions + aside {~~
	~~display: none !important;~~
	}

	~~/* Let the article use the full width */~~
	~~.citizen-body,~~
	~~.mw-body,~~
	~~.mw-body-content,~~
	~~.citizen-content,~~
	~~#mw-content-text {~~
	~~max-width: none !important;~~
	~~margin-right: 0 !important;~~
	~~width: 100% !important;~~
	}

	~~.citizen-page,~~
	~~.citizen-page-container,~~
	~~.citizen-page-content {~~
	~~grid-template-columns: 1fr !important;~~
	~~max-width: none !important;~~
	}

Williams Arcades - Main Page

Braedel — Sat, 12 Sep 2026 04:13:53 GMT

← Older revision		Revision as of 04:13, 12 September 2026
Line 30:		Line 30:
	* [[49-Way Joystick Conversion Board]]		* [[49-Way Joystick Conversion Board]]
	* [[Game Parts]]		* [[Game Parts]]
			* [[4164/41256 RAM Modification]]
	== Wiki Information ==		== Wiki Information ==
	* [[Admin Links]]		* [[Admin Links]]
	* [[Contact Brad]]		* [[Contact Brad]]

MediaWiki:Citizen.css

Braedel — Sat, 12 Sep 2026 04:10:28 GMT

← Older revision		Revision as of 04:10, 12 September 2026
Line 1:		Line 1:
	~~/* All CSS here will be loaded for users of the Citizen skin */~~
	/* Hide right page sidebar (TOC / last modified) */		/* Hide right page sidebar (TOC / last modified) */
	.citizen-page-sidebar,		.citizen-page-sidebar,
	.citizen-toc,		.citizen-toc,
	#citizen-toc {		#citizen-toc,
			.citizen-page-header-actions + aside {
	display: none !important;		display: none !important;
	}		}

			/* Let the article use the full width */
	.citizen-body,		.citizen-body,
	.mw-body-content {		.mw-body,
	max-width: none;		.mw-body-content,
			.citizen-content,
			#mw-content-text {
			max-width: none !important;
			margin-right: 0 !important;
			width: 100% !important;
			}

			.citizen-page,
			.citizen-page-container,
			.citizen-page-content {
			grid-template-columns: 1fr !important;
			max-width: none !important;
	}		}

MediaWiki:Citizen.css

Braedel — Sat, 12 Sep 2026 04:09:26 GMT

Created page with "All CSS here will be loaded for users of the Citizen skin: Hide right page sidebar (TOC / last modified): .citizen-page-sidebar, .citizen-toc, #citizen-toc { display: none !important; } .citizen-body, .mw-body-content { max-width: none; }"

New page

/* All CSS here will be loaded for users of the Citizen skin */
/* Hide right page sidebar (TOC / last modified) */
.citizen-page-sidebar,
.citizen-toc,
#citizen-toc {
display: none !important;
}

.citizen-body,
.mw-body-content {
max-width: none;
}

4164/41256 RAM Modification

Braedel — Sat, 12 Sep 2026 04:07:50 GMT

Pinout comparison

← Older revision		Revision as of 04:07, 12 September 2026
(3 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	Williams MPU's shipped with 24, 4116 DRAM ~~(Dynamic Random Access Memory). These memories are 16k~~(16,384 x 1-bit)~~each. They were released by Mostek~~ in 1977 (only a few years before Defender ~~released!~~		'''Williams MPU'''s shipped with 24 × [[wikipedia:Mostek\|Mostek]] '''4116''' DRAM (16,384 × 1-bit), introduced in 1977 — only a few years before Defender.

	~~These chips require 3 voltages(Triple-Rail) to operate~~:		[[File:4116_Pinout.jpg\|thumb\|400px\|4116 pinout]]
	~~+5 provides the buffers for inputs and outputs to operate at TTL~~
	~~+12 primary power source~~
	~~-5 used as a shield on the substrate to stabilize functionality~~

	~~If the~~ -~~5v drops for any reason while the other 2 voltages are present, the result will be chip overheating and failure in a short time.~~		These chips need three voltages (triple-rail):

	~~Due to these requirements, the 4116 has been a~~ '~~weak link~~' ~~on these boards, especially as the linear~~ power ~~supplies age and the voltage becomes more unstable.~~		* '''+5 V''' — TTL input/output buffers
			* '''+12 V''' — primary power
			* '''−5 V''' — substrate bias / shield

	~~In the early 80~~'~~s some advancements in chip manufacturing were developed~~ and ~~the direct successor for the 4116 was made; the 4164 64 Kilobits (65,536 x 1-bit).~~		If '''−5 V''' drops while +5 and +12 are still present, the chip overheats and fails quickly.
	~~By using an internal bias generator(for the -5v)~~, the chip ~~was able to operate on a single +5v supply~~. By freeing up pins once used by the other power sources, they were able to increase the address range(by one bit) and capacity! These tend to run cooler and are more forgiving to variations in supply voltage

	By the ~~late 80's~~, ~~they were able to pack more space in the chip and utilizing~~ the ~~last unused supply pin, they added another address line~~ and ~~increased~~ the ~~size to 256 Kilobits (262,144 x 1-bit)~~. ~~This is the 41256~~		That triple-rail requirement made the 4116 a weak link on these boards, especially as the linear supplies aged and the rails got noisy.

			== 4164 First Successor ==
			In the early 1980s the direct successor appeared: the '''4164''' (65,536 × 1-bit).

			An internal bias generator supplies the −5 V, so the part runs from a '''single +5 V''' rail. Pins that used to carry the extra supplies became another address bit, which is how capacity went up. 4164s generally run cooler and tolerate supply variation better.

			== 41256 Last 16-Pin Successor ==
			By the late 1980s density had increased again. Using the last unused supply pin as another address line gave the '''41256''' (262,144 × 1-bit).

			== Pinout Comparison ==
	Here is a comparison in pinout:		Here is a comparison in pinout:

			[[File:Ram_Comparison.png\|center\|800px\|4116 vs 4164 vs 41256 pinout]]

			== See also ==
			* [[Hardware - General]]
			* [[Battery Damage]]

File:4116 Pinout.jpg

Braedel — Sat, 12 Sep 2026 04:02:37 GMT

Braedel uploaded File:4116 Pinout.jpg

New page

File:Ram Comparison.png

Braedel — Sat, 12 Sep 2026 03:54:10 GMT

Braedel uploaded File:Ram Comparison.png

New page

4164/41256 RAM Modification

Braedel — Sat, 12 Sep 2026 03:53:18 GMT

Created page with "Williams MPU's shipped with 24, 4116 DRAM (Dynamic Random Access Memory). These memories are 16k(16,384 x 1-bit)each. They were released by Mostek in 1977 (only a few years before Defender released! These chips require 3 voltages(Triple-Rail) to operate: +5 provides the buffers for inputs and outputs to operate at TTL +12 primary power source -5 used as a shield on the substrate to stabilize functionality If the -5v drops for any reason while the other 2 voltages are..."

New page

Williams MPU's shipped with 24, 4116 DRAM (Dynamic Random Access Memory). These memories are 16k(16,384 x 1-bit)each. They were released by Mostek in 1977 (only a few years before Defender released!

These chips require 3 voltages(Triple-Rail) to operate:
+5 provides the buffers for inputs and outputs to operate at TTL
+12 primary power source
-5 used as a shield on the substrate to stabilize functionality

If the -5v drops for any reason while the other 2 voltages are present, the result will be chip overheating and failure in a short time.

Due to these requirements, the 4116 has been a 'weak link' on these boards, especially as the linear power supplies age and the voltage becomes more unstable.

In the early 80's some advancements in chip manufacturing were developed and the direct successor for the 4116 was made; the 4164 64 Kilobits (65,536 x 1-bit).
By using an internal bias generator(for the -5v), the chip was able to operate on a single +5v supply. By freeing up pins once used by the other power sources, they were able to increase the address range(by one bit) and capacity! These tend to run cooler and are more forgiving to variations in supply voltage

By the late 80's, they were able to pack more space in the chip and utilizing the last unused supply pin, they added another address line and increased the size to 256 Kilobits (262,144 x 1-bit). This is the 41256

Here is a comparison in pinout:

Williams Arcades - Main Page

Braedel — Sat, 12 Sep 2026 02:39:18 GMT

← Older revision		Revision as of 02:39, 12 September 2026
Line 1:		Line 1:
	<div style="float: right; margin: 0 0 1em 1em;">		<div style="float: right; margin: 0 0 1em 1em;">
	[[File:Modified_Arcade2.JPG\|thumb\|900px\|none\|Williams Lineup]]		[[File:Modified_Arcade2.JPG\|thumb\|900px\|none\|Williams Lineup]]
	~~<div style="text-align: right; padding-top: 4px;">~~
	~~[[File:Hostinger Logo.png\|30px\|middle\|link=]] <span style="font-size: 85%; font-weight: bold; color: #555; vertical-align: middle;">Hostinger</span>~~
	~~</div>~~
	</div>		</div>
	<strong>Williams Arcade Game Information.</strong>		<strong>Williams Arcade Game Information.</strong>

MediaWiki:Common.css

Braedel — Fri, 11 Sep 2026 21:26:02 GMT

Blanked the page

← Older revision		Revision as of 21:26, 11 September 2026
Line 1:		Line 1:
	~~/* Hide sidebar menus only */~~
	~~#p-navigation,~~
	~~#p-tb,~~
	~~#p-interaction,~~
	~~#p-coll-print_export,~~
	~~#p-lang,~~
	~~#p-Help_about_MediaWiki {~~
	~~display: none !important;~~
	}

	~~#mw-panel {~~
	~~background: none !important;~~
	~~overflow: visible !important;~~
	}

	~~/* Logo in the empty header space left of Page */~~
	~~#p-logo {~~
	~~position: absolute !important;~~
	~~top: 8px !important;~~
	~~left: 8px !important;~~
	~~z-index: 1 !important;~~
	~~width: 220px !important;~~
	~~height: 56px !important;~~
	~~overflow: visible !important;~~
	}

	~~#p-logo a,~~
	~~#p-logo a span {~~
	~~display: block !important;~~
	~~width: 220px !important;~~
	~~height: 56px !important;~~
	~~background-position: left center !important;~~
	~~background-repeat: no-repeat !important;~~
	~~background-size: contain !important;~~
	}

	~~#p-logo img {~~
	~~width: 220px !important;~~
	~~height: auto !important;~~
	~~max-width: none !important;~~
	}

	~~#left-navigation {~~
	~~margin-left: 230px !important;~~
	}

	~~#p-personal,~~
	~~#p-search,~~
	~~#right-navigation,~~
	~~#p-views,~~
	~~#p-cactions {~~
	~~visibility: visible !important;~~
	}

	~~#content,~~
	~~.mw-body,~~
	~~#footer {~~
	~~margin-left: 1em !important;~~
	}

Admin Links

Braedel — Fri, 11 Sep 2026 21:25:23 GMT

Created page with "== Admin Links == * CSS page * Sidebar * Site notice (logo banner) * Files page * Add files * Special pages * Version page * User rights * Recent changes === Direct edit URLs === * [https://williamsarcades.com/index.php?title=MediaWiki:Common.css&action=edit Edit CS..."

New page

== Admin Links ==

* [[MediaWiki:Common.css|CSS page]]
* [[MediaWiki:Sidebar|Sidebar]]
* [[MediaWiki:Sitenotice|Site notice (logo banner)]]
* [[Special:ListFiles|Files page]]
* [[Special:Upload|Add files]]
* [[Special:SpecialPages|Special pages]]
* [[Special:Version|Version page]]
* [[Special:UserRights|User rights]]
* [[Special:RecentChanges|Recent changes]]

=== Direct edit URLs ===
* [https://williamsarcades.com/index.php?title=MediaWiki:Common.css&action=edit Edit CSS]
* [https://williamsarcades.com/index.php?title=MediaWiki:Sidebar&action=edit Edit sidebar]
* [https://williamsarcades.com/index.php?title=MediaWiki:Sitenotice&action=edit Edit site notice]

MediaWiki:Common.css

Braedel — Fri, 11 Sep 2026 21:23:09 GMT

← Older revision		Revision as of 21:23, 11 September 2026
(One intermediate revision by the same user not shown)
Line 1:		Line 1:
	/* Hide sidebar ~~sections, keep the logo~~ */		/* Hide sidebar menus only */
	#mw-~~panel > *:not(~~#p-~~logo)~~ {		#p-navigation,
	display: none;		#p-tb,
			#p-interaction,
			#p-coll-print_export,
			#p-lang,
			#p-Help_about_MediaWiki {
			display: none !important;
	}		}

	#mw-panel {		#mw-panel {
	~~width: auto !important;~~
	~~height: auto !important;~~
	background: none !important;		background: none !important;
	~~padding: 0 !important;~~
	overflow: visible !important;		overflow: visible !important;
	}		}

	~~#mw-head,~~		/* Logo in the empty header space left of Page */
	~~#mw-page-base {~~
	~~position: relative !important;~~
	}

	/* Logo in the header ~~only — scrolls away with the page~~ */
	#p-logo {		#p-logo {
	position: absolute !important;		position: absolute !important;
	top: 8px !important;		top: 8px !important;
	left: 8px !important;		left: 8px !important;
	z-index: ~~1000~~ !important;		z-index: 1 !important;
	width: ~~420px~~ !important;		width: 220px !important;
	height: ~~110px~~ !important;		height: 56px !important;
	overflow: visible !important;		overflow: visible !important;
	}		}
Line 31:		Line 28:
	#p-logo a span {		#p-logo a span {
	display: block !important;		display: block !important;
	width: ~~420px~~ !important;		width: 220px !important;
	height: ~~110px~~ !important;		height: 56px !important;
	background-position: left center !important;		background-position: left center !important;
	background-repeat: no-repeat !important;		background-repeat: no-repeat !important;
Line 39:		Line 36:

	#p-logo img {		#p-logo img {
	width: ~~420px~~ !important;		width: 220px !important;
	height: auto !important;		height: auto !important;
	max-width: none !important;		max-width: none !important;
	~~max-height: none !important;~~
	}		}

	~~/* Only move the left tabs; leave search + personal menu alone */~~
	#left-navigation {		#left-navigation {
	margin-left: ~~280px~~ !important;		margin-left: 230px !important;
	}		}

	#p-personal,		#p-personal,
	#p-search,		#p-search,
	#right-navigation {		#right-navigation,
	~~margin~~-~~left: 0 !important;~~		#p-views,
	~~padding-left~~: 0 !important;		#p-cactions {
			visibility: visible !important;
	}		}

User:JonathanC53

JonathanC53 — Fri, 11 Sep 2026 21:20:27 GMT

User account JonathanC53 was created

MediaWiki:Common.css

Braedel — Fri, 11 Sep 2026 21:16:38 GMT

← Older revision		Revision as of 21:16, 11 September 2026
(One intermediate revision by the same user not shown)
Line 12:		Line 12:
	}		}

	/* Logo ~~stays~~ in the ~~top-left on every~~ page */		#mw-head,
			#mw-page-base {
			position: relative !important;
			}

			/* Logo in the header only — scrolls away with the page */
	#p-logo {		#p-logo {
	position: ~~fixed~~ !important;		position: absolute !important;
	top: ~~-32px~~ !important;		top: 8px !important;
	left: 8px !important;		left: 8px !important;
	z-index: 1000 !important;		z-index: 1000 !important;
	width: ~~672px~~ !important;		width: 420px !important;
	height: ~~176px~~ !important;		height: 110px !important;
	overflow: visible !important;		overflow: visible !important;
	}		}
Line 26:		Line 31:
	#p-logo a span {		#p-logo a span {
	display: block !important;		display: block !important;
	width: ~~672px~~ !important;		width: 420px !important;
	height: ~~176px~~ !important;		height: 110px !important;
	background-position: left center !important;		background-position: left center !important;
	background-repeat: no-repeat !important;		background-repeat: no-repeat !important;
Line 34:		Line 39:

	#p-logo img {		#p-logo img {
	width: ~~672px~~ !important;		width: 420px !important;
	height: auto !important;		height: auto !important;
	max-width: none !important;		max-width: none !important;
Line 40:		Line 45:
	}		}

	/* ~~Room for~~ the ~~fixed logo~~ */		/* Only move the left tabs; leave search + personal menu alone */
	#mw-~~head~~ {		#left-navigation {
	padding-left: ~~690px~~ !important;		margin-left: 280px !important;
			}

			#p-personal,
			#p-search,
			#right-navigation {
			margin-left: 0 !important;
			padding-left: 0 !important;
	}		}

Williams Arcades - Main Page

Braedel — Fri, 11 Sep 2026 21:12:56 GMT

← Older revision		Revision as of 21:12, 11 September 2026
Line 5:		Line 5:
	</div>		</div>
	</div>		</div>

	<strong>Williams Arcade Game Information.</strong>		<strong>Williams Arcade Game Information.</strong>
	* [[Defender]]		* [[Defender]]
Line 23:		Line 22:
	* [[Moon Patrol]]		* [[Moon Patrol]]
	* [[PlayBall]]		* [[PlayBall]]

	<div style="clear: both;"></div>		<div style="clear: both;"></div>

	== General Information - May Apply to many or all ==		== General Information - May Apply to many or all ==
	* [[External Links]]		* [[External Links]]
Line 36:		Line 33:
	* [[49-Way Joystick Conversion Board]]		* [[49-Way Joystick Conversion Board]]
	* [[Game Parts]]		* [[Game Parts]]

	== Wiki Information ==		== Wiki Information ==
			* [[Admin Links]]
	*[[Contact Brad]]		* [[Contact Brad]]

MediaWiki:Common.css

Braedel — Fri, 11 Sep 2026 20:36:51 GMT

← Older revision		Revision as of 20:36, 11 September 2026
(2 intermediate revisions by the same user not shown)
Line 15:		Line 15:
	#p-logo {		#p-logo {
	position: fixed !important;		position: fixed !important;
	top: ~~8px~~ !important;		top: -32px !important;
	left: 8px !important;		left: 8px !important;
	z-index: 1000 !important;		z-index: 1000 !important;
Line 31:		Line 31:
	background-repeat: no-repeat !important;		background-repeat: no-repeat !important;
	background-size: contain !important;		background-size: contain !important;
			}

			#p-logo img {
			width: 672px !important;
			height: auto !important;
			max-width: none !important;
			max-height: none !important;
	}		}

Line 42:		Line 49:
	#footer {		#footer {
	margin-left: 1em !important;		margin-left: 1em !important;
	~~padding-top: 0 !important;~~
	}		}